Five Advantages Of Products
- -Suitable for finishing on a range of materials
- -Six flutes produce a better finish than fewer flutes
- -40-degree helix provides increased cutting action compared to end mills with lower helix angles
- -Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating
- -Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
TiAlN-coated carbide square nose end mill has six flutes, a 40-degree helix angle, and a center-cutting design for finishing on a range of materials. Six flutes produce a better finish than fewer flutes. The 40-degree helix angle offers increased cutting action compared to end mills with lower helix angles, as it moves excess material quickly up the spiral and away from the workpiece. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit.
The TiAlN coating resists heat better than the uncoated finish, TiN coating, and TiCN coating, increasing tool life and performance. It also offers increased hardness compared to TiN and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is + 0.0000 to - 0.0012". The round shank accommodates a range of tool holders.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Capital Tools Group Co. Limited
Contact Person: Jennifer Chueng
Telephone: +86 13510300970
Landline: +86 755 83125062
Company Address: Floor 7 Building B,#1 Huafeng Industrial Park,Bao’an District, Shenzhen China.
Previous: Carbide Micro Square Nose End Mil...